top of page
Main Image (16).png
WHAT YOU CAN HOLD US TO

OUR COMMITMENTS ON THIS WORK

Not a mission statement. These are things you can hold us to on the day, and every one of them is something we actually do.

$25 off all services · online only · mention this ad ·

Group 1597884576 (1).png
Electrician replacing an old fuse box with a modern electrical panel in a Northeast Texas home.

Knob and Tube, Aluminum and Old Panel Replacement

Wiring installed before the 1970s was not built for the way we live now. We replace it in copper, under the license of our master electrician of record.

Knob and tube wiring is an early wiring method used in American homes from roughly the 1880s into the 1940s. It runs two separate conductors through porcelain knobs and tubes, carries no ground wire, and was designed for a fraction of the electrical load a modern house puts on it. It is not always dangerous on sight, but it fails in predictable ways: brittle insulation, amateur splices into modern cable, and heat with nowhere to go where it has been buried under attic insulation. Replacing it in copper is the permanent fix. We do that work on homes across Northeast Texas.

CALL 972-965-9926Text Us
Lucky Electrical mascot ready to help with old wiring replacement.
Group 1597884448 (4).png
12 (1).png

FOUR KINDS OF OLD WIRING, AND HOW TO TELL WHICH ONE YOU HAVE

START HERE

Most people find out the hard way. An inspector writes it up during a sale, a claims adjuster asks a question, or someone opens an attic hatch and sees something that does not look like anything else in the house. Pick the one that sounds like yours.

The tell: white porcelain knobs on the joists in an attic or basement, and two wires running separately rather than bundled together.

12 (1).png

When Your Insurer Is the One Asking

The most common reason people call
Icon of a clipboard representing getting your insurance company's requirement in writing.

Ask your carrier first, in writing

Before you book anything, get their requirement in writing. Some want the whole system replaced. Some care only about the active circuits. Some want documentation of what was done and who did it.

Icon of a house representing getting your home inspected for old wiring.

THEN GET THE HOUSE LOOKED AT

Once you know what they are asking for, the scope can be quoted against it rather than guessed at. Until then any scope of work is a guess, and it is your money being guessed with.

Icon of a quote document representing getting a written price for the electrical work.

We quote to that requirement

We quote the job rather than the hour, and you see the options and the price in full before any work starts.

Icon of a document representing the written paperwork you receive after the job is done.

You get it in writing

Before and after photographs of the work, and a written description of what was done. If your carrier needs a form signed by the contractor, we can help with that too.

A lot of the calls we take about old wiring do not start with a problem in the house. They start with a letter.

Insurance carriers look at wiring installed before the 1970s as a question about risk, not a question about code. That distinction matters, because a house can be perfectly legal and still be a house a carrier does not want to write. Every carrier draws that line in a different place, and some will write the policy with conditions attached rather than decline it outright.

New copper electrical wire and a modern circuit breaker panel ready for installation.

Your two options with us

We offer both. We are not going to pretend they are the same thing, because the federal testing says they are not.

Who should do it

Choosing a complete copper replacement ensures your home's electrical infrastructure meets modern safety standards. Rather than relying on temporary or partial measures, upgrading to a full copper system provides a permanent and reliable solution for your entire property.

Main Image (19).png
Old Federal Pacific Stab-Lok electrical panel known for breaker failure issues.

  FEDERAL PACIFIC

Stab-Lok

The concern is that some breakers do not trip reliably under fault. It is a real concern in this trade and it is also true that a home inspector writing it up is not the same thing as a recall. We look at the panel in front of us rather than quoting off the label on the door.

Panels That Come Out for What They Are

Some panels come out because the house needs more power. That is a different job. The panels below come out because of what they are.

Not a capacity problem

Federal Pacific & Stab-Lok

Argued About For 40 Years

Zinsco / Sylvania-Zinsco

Bus Bar Contact

Challenger

Similar Family

Pushmatic

Age And Parts

Fuse Boxes

No Ground, No Room

Need More Capacity Instead?

Zinsco electrical panel with potential bus bar contact problems.

  ZINSCO & CHALLENGER

Contact failure

A different pattern. Breakers can lose solid contact with the bus bar, and the bus can degrade where they meet, which produces heat at the connection while the breaker sits there looking perfectly fine from the front.

Vintage fuse box that lacks modern grounding and capacity for today's appliances.

  FUSE BOXES

Not automatically an emergency

A working fuse box is not an emergency. What forces the change is everything around it: no room to add circuits, no ground, no way to add the arc-fault and ground-fault protection modern devices expect, and the standing temptation to answer a nuisance blow with a bigger fuse.

Cartoon dog mascot holding a phone saying Call Lucky

Not sure which one you have?

That is a completely normal place to start, and it is a short conversation. Give us a call and tell us what you are looking at.

10 (1).png

WHAT REPLACING IT ACTUALLY INVOLVES

Replacing the wiring in a house that is already lived in is the most invasive work we do. Here is the whole run, in order.

START TO FINISH
Comparison of knob and tube wiring versus aluminum wiring to determine replacement scope.

Rewire the House, or Fix Part of It

It depends on which wiring you have, and the two answers are genuinely different. That is not a hedge, it is a safety limit on one and a sequencing choice on the other.

THE QUESTION EVERYBODY ASKS

Beyond that, five things move the number, and they are the five we look at first.

WHAT MOVES THE NUMBER

THE FIVE THAT DECIDE IT

How much of the original system is still live rather than abandoned in place

Whether there is attic and crawlspace access to pull new cable without opening finished walls

​Whether those walls are drywall or plaster and lath

How many circuits the house needs that it does not currently have

Whether the panel is coming out anyway

A house with a walkable attic and a decent crawlspace is a different job from the same house on a slab with plaster walls.

KNOB AND TUBE

ALL AT ONCE, AND HERE IS WHY

On knob and tube we take the whole project in one go. There typically is not a point in the system where we can safely stop: the original circuits interlace through the house, splices into later cable are common, and a half-finished system leaves live original wiring feeding circuits nobody can now map. Our liability and your safety both point the same way on this one.

ALUMINUM

CAN BE STAGED, IN A SENSIBLE ORDER

Aluminum is different. We can tailor a partial job and work through the house in stages, and there is an order that makes sense: the larger loads first, so dryers, air conditioning equipment and the kitchen, then on to the lighting and receptacle circuits. That lets you spread the work without leaving the highest-current connections until last.

What we will not do is guess at that over the phone and call it an estimate. We come out, we look, and we tell you which one your house is.

STAGED ALUMINUM WORK

SOMETIMES RIGHT, SOMETIMES A FALSE ECONOMY

Staging aluminum work is a real answer in some houses. In others it is a false economy, because you spend most of the disruption to solve half the problem and then live with the other half until you come back to it.

WHOLE-HOUSE REWIRINGPANEL UPGRADE FOR CAPACITYELECTRICAL INSPECTION GROUNDED OUTLETS & NEW CIRCUITSSOMETHING FAILING RIGHT NOW
Frame 15.png

WHO DOES THE WORK

ONE NAME ON THE LICENSE

Every job runs under the license and standard of our master electrician of record, Kyle Robison, TDLR #782768. That is not a slogan, it is a number you can type into the Texas Department of Licensing and Regulation register and check for yourself in about a minute. The company license is TECL #41101 and it is on the same register.

Kyle has been in the trade more than twenty years. Lucky Electrical Service has been serving Northeast Texas since March 2026, and we would rather you know both of those numbers separately than have us blur them together into something that sounds older than it is.

For this kind of work we use FLIR thermal imaging on panels and wiring, along with Klein and Ideal circuit analyzers and locators. On old wiring that matters, because a lot of what is wrong with it is heat you cannot see and circuits that do not run where the last person assumed they did.

 FULLY LICENSED AND INSURED
BBB ACCREDITED
Kyle Robison, licensed master electrician at Lucky Electrical Service in Northeast Texas.
Background (17).png

OLD WIRING QUESTIONS

STRAIGHT ANSWERS
  • Knob and tube is visible as two separate wires running through white porcelain knobs and tubes, while aluminum looks exactly like copper from the outside and is identified by the letters AL or ALUMINUM printed on the cable jacket. Take a flashlight into an unfinished attic or garage and hold it at a low angle so the raised lettering catches the light. If the marking also reads CU-CLAD or COPPER-CLAD, that is a different material. If you cannot tell, that is normal, and it is exactly what a look at the house settles.

  • It depends which wiring you have. Knob and tube we take all at once, because there typically is not a point in the system where we can safely stop and leave the rest live. Aluminum can be staged, and there is a sensible order: the larger loads first, so dryers, air conditioning equipment and the kitchen, then the lighting and receptacle circuits.

  • While partial measures are sometimes discussed in the industry, we focus entirely on delivering a safe, permanent solution. The permanent fix is replacing the branch circuits in copper, which is the option we provide and recommend to ensure long-term safety and peace of mind.

  • Carriers set their own requirements and they differ, so the first step is asking yours in writing what specifically satisfies them, because the answer changes whether you need a full rewire or a narrower scope. Some want every original circuit gone. Some care only about what is still live. Once you have that in hand we can quote to it rather than guessing at it.

  • It is a real and long-standing concern in the trade, and it is also true that a home inspector flagging one is not the same thing as a recall, which is why we assess the panel in front of us rather than quoting off the label. We open it up, look at the bus, the breakers and the terminations, and tell you what we actually find.

  • Power comes off circuit by circuit rather than all at once wherever the layout allows it, and we work the accessible routes first so that the number of openings in finished walls is as small as the house permits. Where we do have to open a wall, you will know where and why before it happens, not after.

The ones people actually ask before they call, answered without a sales pitch.

Mascot dog answering common questions about old knob and tube and aluminum wiring.
Lucky Electrical to request a visit
LET’S GET IT SORTED

GET SOMEONE TO LOOK AT IT

Call and tell us what you are looking at, or what your inspector or your carrier has written down. If it is easier to type it out, send the form and we will pick it up in office hours.

Contact Lucky Electrical to request a visit for old wiring inspection and replacement.

GO ON, ASK. I’M ALL EARS.

Seriously. Look at them.

REQUEST A VISIT

Tell us the lake and what the circuit is doing. We will come back to you.

CALLTEXT US

Lucky Electrical LLC · TECL #41101

Footer (1).png

TECL #41101


© 2026 Lucky Electrical LLC. All rights reserved.

Site by

Folder 1 (59) 4.png
bottom of page